Top sellers

Protega ViterClad 50 Two Pack Polyurethane for Cladding

New product

ViterClad 50 finish is a Two Pack, High Build, Semi-Gloss coating for the routine maintenance painting of architectural cladding.

Ideal for renovating and refurbishing aged Plastisol, bare galvanising and aluminium cladding after priming with ViterClad Bonding Coat.

Available in any colour

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£79.80

- +

 
Product Info

ViterClad 50 finish is a Two Pack, High Build, Semi-Gloss coating for the routine maintenance painting of architectural cladding.

Recommended for the maintenance of Corus Colorcoat HP200 and HPS200 cladding.
Expected system lifetime up to 15 years (depending on exposed environment and shade).
Suitable for PVF2, Silicone Polyester & Polyester Cladding when applied over ProtegaClad Bonding Coat.
Suitable for urban, marine and industrial environments.
Tough, durable finish combining abrasion resistance with outstanding colour and sheen retention.
Good cleaning properties for ease of building maintenance.
Cures at sub zero temperatures and has good climatic tolerance.
Tolerant of slight surface moisture during application.
Easy to apply by spray, brush or roller and in many instances a single coat is sufficient.
EPA compliant

Preparation
Surfaces to be coated must be clean, dry and free from any material such as oil, grease, salts and dirt that might affect adhesion.
Remove loose flaking or friable material. 
Where necessary, remove weld spatter and grind smooth all rough,sharp edges and weld seams.

Galvanised steel
Thoroughly degrease with Cleaner Degreaser (Product Reference H30 or ND14) and lightly abrade any very shiny areas. 

Mild Steel 
Degrease with a Cleaner Degreaser (Product Reference H30 or ND14) and either manually abrade or blast clean to Sa2½ (ISO 8501-1:2007)
If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Phosphate Steel 
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade prior to application of the Primer Coat

Stainless Steel
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade. 

Aluminium and Alloys
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade. 

The temperature of the ambient air, surface or paint should not fall below 5ºC during application or drying.

Application Conditions
Relative humidity should not exceed 80%. 
The surface temperature of the steel should remain at least 3ºC above the dew point.
Cold damp conditions will impair drying times and the final finish.

Recommended Finish Coats
Overcoat with itself only

Recommended Thinners 
1737 or 1048 Thinners

Coverage Rates
Recommended Film weight:Minimum WFT 86µm Maximum 172µm
Theoretical coverage rate: 5.8-11.6m² per litre

Application Methods
Protega Viterclad 50 Semi-Gloss can be applied by the following methods.

Airless Spray: Yes
Conventional Spray: Yes
Brush: Yes 
Roller: Yes

Mix Ratio: 9 Parts base :1 Part hardener

Pot life: 4 hours at 23ºC

Application Guidance 
Airless Spray
Output fluid pressure at tip 2200-2500psi, 
Tip Size 13-17 thou (0.33-0.43 mm) 
Thinning with 1737 (Note thinning will reduce the film weight)

Brush / Roller 
Recommended for small areas and touch up. Thin as appropriate to achieve a smooth film flow.

Please note: application by brush and roller will result in a reduced film thickness and is recommended only for small areas of touch up/remedial work

Drying times at a WFT at 86µm and 23ºC 
Dust Dry: 1h 
Recoatable: 12h
Hard Dry: 6h 

Cleaning Tools and Equipment
Clean equipment with 1737 Thinner after use

% Volume Solids : 56-60%
VOC content : 379-419g / litre

Safe use
This product is formulated for professional use. 
Please ensure suitable and appropriate personal protective equipment is worn during handling and application.

For more detail please consult the Product Datasheet.
Please contact us for the Health and Safety Datasheet.

 
Download

ViterClad 50

Products Description

Download PDF
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Accessories

30 other products in the same category:

Menu

Top
Compare 0