Current best sellers

Axalta ViterPrime 035 High Build Zinc Phosphate Primer/Finish

New product

A Single Pack, Quick Drying High Build Zinc Phosphate Primer for airless spray application to blast cleaned structural steelwork.

It can be used as a finish coat.

Matt Finish.

More details

We can tint this product to your exact specification from any colour chart or sample. Enter your chosen colour in the box below and click CONFIRM COLOUR before adding the product to your basket. Need help? Call us on 01793 511537

ENTER COLOUR CHOICE:

loader

£101.80

- +

Brand: Axalta

 
Product Info

A Single Pack, Quick Drying High Build Zinc Phosphate Primer for airless spray application to blast cleaned structural steelwork

Excellent build properties and hold-up on edges

Can be overcoated with ViterThane PLV and PLS two pack polyurethane finishes

Readily available in a wide range of Colour including BS and RAL

Can be used as a base coat for most thin film intumescent coatings 

Preparation
Surfaces to be coated must be clean, dry and free from any material such as oil, grease, salts and dirt that might affect adhesion.
Remove loose flaking or friable material.
Where necessary, remove weld spatter and grind smooth all rough,sharp edges and weld seams.

Galvanised steel
Thoroughly degrease with Cleaner Degreaser (Product Reference H30 or ND14) and lightly abrade any very shiny areas. Treat with a galvanising wash / mordant solution (Product Reference HSP 84/1)
prior to application of the Primer Coat

Mild Steel
Degrease with a Cleaner Degreaser (Product Reference H30 or ND14) and either manually abrade or blast clean to Sa2½ (ISO 8501-1:2007)
If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Phosphate Steel
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade prior to application of the Primer Coat

Stainless Steel
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade. Etch prime with a Two Pack Etch Primer, (Product Reference 26/3) prior to application of the Primer Coat

Aluminium and Alloys
Degrease with Cleaner Degreaser (Product Reference H30 or ND14) and manually abrade. Etch prime with a Two Pack Etch Primer, (Product Reference 26/3) prior to application of the Primer Coat

The temperature of the ambient air, surface or paint should not fall below 5ºC during application or drying.

Application Conditions
Relative humidity should not exceed 80%.
The surface temperature of the steel should remain at least 3ºC above the dew point.
Cold damp conditions will impair drying times and the final finish.

Recommended Finish Coats:, Viterthane PLV, Viterthane PLS

Recommended Thinners
1006 Thinner

Coverage Rates
Recommended Film weight: WFT minimum 129µm, maximum 258µm
Theoretical coverage rate: 4-8m² per litre

Application Methods
viterprime 035 can be applied by the following methods.

Airless Spray; Yes
Conventional Spray; No
Brush; Yes
Roller; No

Application Guidance
Airless Spray
Output fluid pressure at tip 2000 -2500psi,
Tip Size 17-19 thou (0.43-0.48 mm)
Thinning with 1006  (Note thinning will reduce the film weight)

Brush 

Recommended for small areas of touch up or remedial work only
Thin as appropriate to achieve a smooth film flow.
Please note: application by brush will result in a reduced film thickness and is recommended only for small areas of touch up/remedial work

Drying times at a WFT of 129µm at 23ºC
Dust Dry   15 minutes 
Hard Dry   90 minutes

Cleaning Tools and Equipment

Clean equipment with 1006 Thinner after use

% Volume Solids :56-60%
VOC content : 412g / litre

Safe use.
This product is formulated for professional use.
Please ensure suitable and appropriate personal protective equipment is worn during handling and application.

For more detail please consult the Product Datasheet.
Please contact us for the Health and Safety Datasheet

 
Download
 
Product customization

We can tint this product to your exact specification from any colour chart or sample. If you know the reference please enter the code in the field below, click SAVE and add the product to your basket. We also have ideas to set the ball rolling in our Colour section where we have added a number of widely used colour ranges. Need help? Call us on 01793 511537

Enter your COLOUR REFERENCE in the box below:

loader

* required fields

Accessories

14 other products in the same category:

Menu

Top
Compare 0