Chromate Free Etch Primer Maximize

Chromate Free Etch Primer

A High Quality Two Pack Chromate Free Ech Primer for use on Aluminium, Bright and Stainless Steel and Zintec.

More details

£ 5.83

 A high quality two pack chromate free etch primer for use on aluminium, bright and stainless steel and zintec. Can be used on lightly rusted or flash rusted steelwork. Mix in the ratio of 1:1 with Activator.

Surface Preparation                                                                                                           
Surfaces to be coated must be clean, dry and free from any material that might affect adhesion, remove loose flaking or friable material. Apply in dry conditions where humidity is at normal levels.
Cold damp conditions will impair drying times and the final finish. The temperature of the substrate should be minimum 0°C and at least 3°C above the dew point of the air.
The product should not be applied at temperatures below 0°C where there is a possibility of ice formation on the substrate. The temperature of paint itself should be above + 15°C for proper application.
Good ventilation is required in confined areas during application and drying.
 
Thoroughly degrease bare metalwork or previously painted and primed surfaces with HSP ND14 Cleaner Degreaser to remove dirt, grease and salts.
Structural Steel Surfaces: For optimum results blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, manual rust removal and the application of etching, chromate or zinc phosphate primers are recommended to ensure adhesion and long term corrosion resistance.                                                      
General Advice and Good Practice                    
Mild Steel - Degrease and either manually abrade or shot blast to Sa2½  before application of the primer coat.                                                                                                        
Phosphate Steel - Degrease and either manually abrade or shot blast to Sa2½ before application of the primer coat                                                                                                        
New Galvanised Steel - Degrease and treat with Galvanising Wash 84/1 before application of the primer coat.                                                                                                        
Old Galvanised Steel - Degrease and abrade or apply Rust-Oleum Surfa Etch Solution 108 to remove surface salts.                                      
Aluminium - Degrease and apply one coat of Etch Primer before application of the primer coat.
Stainless Steel - Degrease and abrade if possible before application of one coat of Etch Primer  

Application
For full application information please refer to the Product Data Sheet or call our technical team.
Cleaning Equipment
Clean equipment with TA2 Etch thinners after use

Application Conventional / Airless Spray
Thinner Activator JW26FC
Drying time (touch dry) 20 minutes
Drying time (recoat) 30 minutes
Theoretical Coverage m² / litre 15

No customer comments for the moment.

Write your review

Chromate Free Etch Primer

Chromate Free Etch Primer

A High Quality Two Pack Chromate Free Ech Primer for use on Aluminium, Bright and Stainless Steel and Zintec.

Write your review

Related products

Penetrating Rust Primer Penetrating Rust Primer
Minimal preparation - apply directly to rust covered...
Compliant Anti Corrosion Primer Compliant Anti Corrosion...
A Waterborne, Low Odour Compliant Anti-Corrosion Primer for...
Primer For Vintage Vehicles Primer For Vintage Vehicles
A one coat modified alkyd primer with excellent weathering and...
Heavy Duty Epoxy Zinc Phosphate Primer Heavy Duty Epoxy Zinc...
High Performance, Heavy Duty, Two Pack Epoxy Zinc Phosphate...
Epoxy MIO Primer Epoxy MIO Primer
 A High Performance, Two Pack Epoxy Primer with added...
Chromate Containing Etch Primer Chromate Containing Etch...
A High Performance Two Pack Etch Primer Contianing Zinc...
Acrylic Primer Non Isocyanate Acrylic Primer Non Isocyanate
Non Isocyanate Two Pack Acrylic Primer ideal for large...
20L, Tikkurila Fontecryl AP Fast Dry Primer 20L, Tikkurila Fontecryl AP...
A waterborne, single pack fast drying acrylic based...
20L,Tikkurila Fontecryl PP Primer for Powder Coating 20L,Tikkurila Fontecryl PP...
A waterborne, single pack fast drying acrylic based primer...
20L, Tikkurila Temablast EV 110 20L, Tikkurila Temablast EV...
Two pack, iron oxide pigmented epoxy shop primer. Protects...
20L, Tikkurila Temacoat GF Primer 20L, Tikkurila Temacoat GF...
A two pack, polyamide cured epoxy primer containing zinc...
Tikkurila Temacoat GPL-S Primer Tikkurila Temacoat GPL-S...
A two pack, polyamide-cured high build epoxy primer containing...
20L, Tikkurila Temacoat HB Resin Modified Epoxy Primer 20L, Tikkurila Temacoat HB...
A two pack resin modified epoxy paint containing...
20L, Tikkurila Temacoat SPA, Zinc Phosphate Primer 20L, Tikkurila Temacoat...
A semi-matt, two pack resin modified epoxy paint containing...
20L, Tikkurila Temacoat SPA Primer MIO, Aluminium &  Zinc Phosphate Paint 20L, Tikkurila Temacoat SPA...
A highly durable, semi matt two pack resin modified epoxy...
20L, Tikkurila Temanyl MS  Vinyl Modified Primer 20L, Tikkurila Temanyl MS...
A single pack modified vinyl primer with good resistance to...
20L, Tikkurila Temanyl PVB 20L, Tikkurila Temanyl PVB
A single pack, matt finish polyvinyl butyral adhesion primer....
20L,Tikkurila Temaprime AB, Alkyd Primer 20L,Tikkurila Temaprime AB,...
A high performance single pack anti-corrosion pigmented alkyd...
Tikkurila Temaprime EE Fast Dry Primer Tikkurila Temaprime EE Fast...
A fast drying, single pack anti-corrosion special primer....
Tikkurila Temaprime EUR Fast Dry Primer Tikkurila Temaprime EUR...
A fast drying, single pack anti-corrosion alkyd primer. Ideal...
20L, Tikkurila Temaprime GF, Fast Dry Primer 20L, Tikkurila Temaprime...
A fast drying, single pack anti-corrosion pigmented special...
20L, Tikkurila Temacoat GPL-S MIO 20L, Tikkurila Temacoat...
A two pack, polyamide cured epoxy paint pigmented with...
20L, Tikkurila Temacoat SPA MIO Epoxy, with Aluiminium, Zinc Phosphate and MIO 20L, Tikkurila Temacoat SPA...
A high build, low solvent, two pack polyamide-cured epoxy...
One Coat Primer Finish One Coat Primer Finish
A one coat, anti-corrosion primer/finish for structural steel....
20L, Tikkurila Temasil 90 20L, Tikkurila Temasil 90
A two pack, ethyl silicate zinc rich paint to offer cathiodic...
6L, Tikkurila Temazinc EE 6L, Tikkurila Temazinc EE
A single pack zinc dust paint offering cathodic protection for...
8L, Tikkurila Temazinc 99 two component, polyamide zinc rich epoxy paint 8L, Tikkurila Temazinc 99...
A two pack, polyamide cured zinc epoxy paint formulated to...
RustOleum 1060 1080 Heavy Duty Metal Primer RustOleum 1060 1080 Heavy...
The long life metal protection system for new, blasted or...
RustOleum 769 Damp Proof Primer RustOleum 769 Damp Proof...
Application of 769 requires minimal preparation - apply...
RustOleum 569/580 Quick Drying Metal Primer RustOleum 569/580 Quick...
A high performance, quick drying metal primer for bare and...