Protega ViterEtch CFE Two Pack chromate Free Etch Primer Maximize

Protega ViterEtch CFE Two Pack Chromate Free Etch Primer

A two pack chromate-free etch primer for new galvanising and non-ferrous metals. 
Formulated for the Commercial Vehicle, ACE and general metal industries.
Colour – Buff

More details

£ 15.92

A two pack chromate-free etch primer for new galvanising and non-ferrous metals. Designed for the Commercial Vehicle, ACE and general metal industries.
Excellent adhesion to a wide range of substrates and can be over coated with single pack and two pack materials
Can be used as a sealer coat on aluminium and zinc metal spray and on aluminium cladding and galvanised structures
Colour – Buff
 
Surface Preparation:
Carbon Steel (non-blasted)
Thoroughly degrease and prepare to St2 (ISO 8501- 1:2007) taking care to avoid ‘polishing’ the surface  
Galvanised Steel
Thoroughly degrease using a propriety biodegradable degreaser, rinse with clean fresh water and allow to dry before coating. It is essential to remove all flux, zinc salts and high profile zinc spatter. Very smooth or glossy areas should be lightly abraded to provide a ‘key’  
Aluminium, Copper, Brass, Cadmium and Nickel 
Thoroughly degrease using a propriety biodegradable degreaser to remove all verdigris, salts and other contaminants. Wash with clean fresh water and allow to dry. Very smooth or glossy areas should be lightly abraded to provide a ‘key’  
Zinc and Aluminium Metal Spray
Ensure the surface is dust free and no salt formation has occurred. Apply the material until absorption is complete
 
All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams.
 
Mixing:
Mix only in the proportions stated, mixing each component individually then together using a mechanical agitator. Agitate periodically during use to ensure product remains homogeneous. Mix immediately prior to using. Mixed material must be discarded after 8 hours at 23ºC.
Thinner:  950 Thinner
Equipment Cleaner : 950 Thinner
 
Application Conditions :
Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point. Only apply this product when the above conditions can be maintained throughout the critical application and drying/curing process. Paint temperature should ideally be at a minimum of 15oC.
Application Methods: 
Method Airless Spray -Yes
Conventional Spray -Yes
Brush - Yes
Roller  - No  
 
Airless Spray: 
Output fluid pressure at tip 1500-2500 psi,
Tip Size: 9-13 thou (0.23-0.33mm)  
 
Avoid sags and runs particularly when application is by brush
 
Product Notes :
Do not exceed the maximum stated dry film thickness.
Should not be applied or cured at temperatures below 4o C.
Temperature should preferably remain at a minimum of 10oC.
Do not use on surfaces operating above of 60oC.  
Must be protected from weathering prior to being recoated.  
Inadequate surface preparation will result in poor coating adhesion.  
 
Caution :
Contains phosphoric acid
Low flash material – ventilate to keep solvent vapour levels below minimum explosive limit and observe low flash regulations
 
Health & Safety :
Containers are provided with safety labels which should be observed.
Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request.

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

Protega ViterEtch CFE Two Pack Chromate Free Etch Primer

Protega ViterEtch CFE Two Pack Chromate Free Etch Primer

A two pack chromate-free etch primer for new galvanising and non-ferrous metals. 
Formulated for the Commercial Vehicle, ACE and general metal industries.
Colour – Buff

Write your review

Related products

RustOleum Metal Cladding Primer RustOleum Metal Cladding...
Don’t replace old and weathered cladding, Renovate with the...
Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Antifouling Teamac Tropical Killa...
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...
Teamac Antifouling A Teamac Antifouling A
Teamac "A" Antifouling is a premium physically ablative...
Teamac Boot Topping Teamac Boot Topping
5A high quality, hard wearing boot-topping paint. Used to...
Teamac Anti-Slip Suregrip Deck paint Teamac Anti-Slip Suregrip...
Teamac Suregrip provides an anti-slip finish for wood, grp and...
Teamac Bilge Paint Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces...
RustOleum Combicolor RustOleum Combicolor
A high performance, one coat interior and exterior maintenance...
Rustoleum Pegakote Rustoleum Pegakote
A waterborne, high performance satin gloss floor coating with...
RustOleum Flexible  Epoxy B95 RustOleum Flexible Epoxy B95
 Outstanding corrosion protection in heavy industrial or...
SteelSeal Metal Cladding Maintenance Paint SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Paint  Akzo Nobel's...
SteelSeal Metal Cladding Maintenance Primer SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Primer Akzo Nobel's...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...
Protega ViterPrime 016 Single Pack Zinc Phosphate Primer Protega ViterPrime 016...
 An easy to use alkyd zinc phosphate anticorrosive primer, for...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...
Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers Protega ViterLac C12...
 A single pack, phenolic-modified alkyd primer/finish,...
Protega ViterLac Containergard HS Protega ViterLac...
A single pack Modified Anti-Corrosive One Coat Full Primer /...
Protega Prime VRP Compliant Primer for Vehicle Refinishing Protega Prime VRP Compliant...
A single pack, fast drying alkyd primer specially designed for...
ProtegaPrime QD Matt Primer ProtegaPrime QD Matt Primer
A single pack Modified Anti-Corrosive Matt Primer for the ACE...
Protega Viterlac ACV Quick Drying Alkyd Gloss Finish Protega Viterlac ACV Quick...
Protega Viterlac ACV 90 A fast drying modified alkyd gloss...
Protega ViterLac ABV  High Build Gloss Finish Protega ViterLac ABV High...
A high performance, modified alkyd, high gloss finish which...
Protega ViterLac AM112 Urethane Alkyd Micaceous Iron Oxide Protega ViterLac AM112...
ViterLac AM112 - Urethane Alkyd MIO A single pack, white...
Protega ViterShield SPF Epoxy Primer/Finish Protega ViterShield SPF...
ViterShield SPF Epoxy Primer/Finish A two pack epoxy...
ProtegaLac PU90 PU modified  High Gloss Enamel ProtegaLac PU90 PU modified...
ViterLac PU90 Gloss Finish A general purpose urethane alkyd...
ProtegaLac TF95  High Gloss CV Enamel ProtegaLac TF95 High Gloss...
 A single pack, full gloss, high quality finish specially...