ProtegaPrime VRP Compliant Primer for Vehicle Refinishing Maximize

Protega Prime VRP Compliant Primer for Vehicle Refinishing

A single pack, fast drying alkyd primer specially designed for the Commercial Vehicle (CV) market, as a primer for ViterLac TF95 high gloss finish.

It can also be topcoated with Viterthane or ViterDur two pack polyurethane finishes.

More details

£ 10.06

ViterPrime VRP Primer

A single pack, fast drying alkyd primer specially designed for the Commercial Vehicle (CV) market, as a primer for ViterLac TF95 high gloss finish. It can also be topcoated with Viterthane or ViterDur two pack polyurethane finishes.

It has excellent flow and wet edge characteristics with good hot spray application and outstanding corrosion resistance.

It can also be applied by standard (unheated) airless or conventional spray. It can be used as a primer for steel and for GRP/fibreglass substrates.  

 

A single pack, fast setting alkyd primer specially designed for overcoating with ViterLac TF95 and other high performance gloss finishes.

Specially designed for overcoating with high gloss, high performance topcoats

Outstanding corrosion resistance properties

Compliant to PG6/34b (06) (below 540 gm/lt)

Excellent flow and wet edge characteristics

Good hot spray application

 

Surface Preparation   

All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination.

Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams  

Blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns  

Where blast cleaning is impractical the surface should be prepared to St2 (ISO 8501-1:2007) taking care to avoid ‘polishing’ the surface

Galvanised substrates – first apply a suitable adhesion primer such as ViterClad Bonding Coat   GRP/Fibreglass – abrade and degrease with 1736 Thinners.

 Mixing

Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.

Thinner 1736 Thinner

Equipment Cleaner 1736 Thinner

Application Conditions

Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.

Application Methods

Airless Spray, Yes

Conventional Spray, Yes

Brush, No

Roller, No

Airless Spray (recommended): Output fluid pressure at tip 2000-2500 psi, Tip Size 11-15 thou (0.28-0.38 mm)  

Conventional spray: Typical air atomising pressure 60-80 psi, 1.0 to 1.4mm tip.

Will require the addition of up to 25% 1736 Thinner to achieve optimum application viscosity. Note: this may render the thinned product non-compliant with PG6/34b (06

Product Notes:

Overcoating Designed for overcoating with high performance gloss topcoats including: ViterLac TF95 – modified urethane alkyd gloss ViterThane PLV – 2 pack polyurethane gloss finish ViterDur HS90 - 2 pack polyurethane gloss finish

Health & Safety:

Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request.

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

Protega Prime VRP Compliant Primer for Vehicle Refinishing

Protega Prime VRP Compliant Primer for Vehicle Refinishing

A single pack, fast drying alkyd primer specially designed for the Commercial Vehicle (CV) market, as a primer for ViterLac TF95 high gloss finish.

It can also be topcoated with Viterthane or ViterDur two pack polyurethane finishes.

Write your review

Related products

RustOleum Metal Cladding Primer RustOleum Metal Cladding...
Don’t replace old and weathered cladding, Renovate with the...
Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Antifouling Teamac Tropical Killa...
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...
Teamac Antifouling A Teamac Antifouling A
Teamac "A" Antifouling is a premium physically ablative...
Teamac Boot Topping Teamac Boot Topping
5A high quality, hard wearing boot-topping paint. Used to...
Teamac Anti-Slip Suregrip Deck paint Teamac Anti-Slip Suregrip...
Teamac Suregrip provides an anti-slip finish for wood, grp and...
Teamac Bilge Paint Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces...
RustOleum Combicolor RustOleum Combicolor
A high performance, one coat interior and exterior maintenance...
Rustoleum Pegakote Rustoleum Pegakote
A waterborne, high performance satin gloss floor coating with...
RustOleum Flexible  Epoxy B95 RustOleum Flexible Epoxy B95
 Outstanding corrosion protection in heavy industrial or...
SteelSeal Metal Cladding Maintenance Paint SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Paint  Akzo Nobel's...
SteelSeal Metal Cladding Maintenance Primer SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Primer Akzo Nobel's...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...
Protega ViterPrime 016 Single Pack Zinc Phosphate Primer Protega ViterPrime 016...
 An easy to use alkyd zinc phosphate anticorrosive primer, for...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...
Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers Protega ViterLac C12...
 A single pack, phenolic-modified alkyd primer/finish,...
Protega ViterLac Containergard HS Protega ViterLac...
A single pack Modified Anti-Corrosive One Coat Full Primer /...
ProtegaPrime QD Matt Primer ProtegaPrime QD Matt Primer
A single pack Modified Anti-Corrosive Matt Primer for the ACE...
Protega Viterlac ACV Quick Drying Alkyd Gloss Finish Protega Viterlac ACV Quick...
Protega Viterlac ACV 90 A fast drying modified alkyd gloss...
Protega ViterLac ABV  High Build Gloss Finish Protega ViterLac ABV High...
A high performance, modified alkyd, high gloss finish which...
Protega ViterLac AM112 Urethane Alkyd Micaceous Iron Oxide Protega ViterLac AM112...
ViterLac AM112 - Urethane Alkyd MIO A single pack, white...
Protega ViterShield SPF Epoxy Primer/Finish Protega ViterShield SPF...
ViterShield SPF Epoxy Primer/Finish A two pack epoxy...
ProtegaLac PU90 PU modified  High Gloss Enamel ProtegaLac PU90 PU modified...
ViterLac PU90 Gloss Finish A general purpose urethane alkyd...
ProtegaLac TF95  High Gloss CV Enamel ProtegaLac TF95 High Gloss...
 A single pack, full gloss, high quality finish specially...
Protega ViterShield 177 Protega ViterShield 177
ViterShield 177 Epoxy Primer/Finish An economical, high...