ProtegaLac Containergard HS Maximize

Protega ViterLac Containergard HS

A single pack Modified Anti-Corrosive One Coat Full Primer / Finish for containers.

Helps disguise typical dents and welds.

Specially developed for the transport container market and for Commercial Vehicle Chassis protection.

More details

£ 6.79

Protega ViterLac Containergard (HS)

 A high build, fast drying one-coat system with a Sheen finish which helps disguise typical dents and welds. Specially developed for the transport container market and for Commercial Vehicle Chassis protection.

Used on dry cargo transport containers, ISO tank containers, anti-vandal accommodation units, waste containers and other industrial steel fabrications. A high build, fast drying one-coat system with a Sheen finish which helps disguise typical dents and welds. It has very good exterior durability. A high content of zinc phosphate anticorrosive pigment gives high levels of protection in aggressive environments. Tested to BS476 Part 7 (Surface Spread of Flame) – Class 1, and BS476 Part 6 (Fire Propagation) – Class 0.

Resistant to splashes of diesel, petrol and hydraulic fluid.

 

 Surface Preparation

All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams

For best performance, blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns Can also be applied to clean, dry, abraded steel

 

Aluminium and Zinc coated surfaces: surfaces should be degreased, abraded and etch primed prior to application of ViterLac Containergard HS.   

 

Existing coatings: ViterLac Containergard HS has been found to be tolerant to a wide range of existing coatings, including chlorinated rubber and vinyl systems which other topcoats may cause to soften or blister. A test area is recommended to ensure compatibility prior to full coating. Longer term performance will depend on the nature and integrity of the existing system.

Mixing Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.

 

Thinner , 1006 Thinner

Equipment Cleaner 1006 Thinner

 

Application Conditions

Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point.

Paint temperature should ideally be at a minimum of 15oC.

 

Application Methods

Airless Spray, yes

Conventional Spray, yes  

Brush, no except for touch up

Roller, no

 

Airless Spray: Output fluid pressure at tip 2500 psi, Tip Size 15-17 thou (0.38- 0.43 mm)

Conventional spray: requires thinning with 1006 Thinner which will increase the VOC content  

Brush should be used for touch up of small areas only

 

Splash Resistance: When fully cured, resists splashes of diesel, petrol and hydraulic fluid. Splashes of brake fluid may cause some film softening and loss of gloss. Splashes should be immediately removed to prevent longer term film damage .

*Colours such as yellows, reds and oranges have lower opacity, especially when produced using lead-free pigments. Two or three coats of these shades may be required, relative to only one coat of a grey or red oxide, so that yellows, bright reds and oranges may not be suitable as one coat systems

Health & Safety

Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request.

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

Protega ViterLac Containergard HS

Protega ViterLac Containergard HS

A single pack Modified Anti-Corrosive One Coat Full Primer / Finish for containers.

Helps disguise typical dents and welds.

Specially developed for the transport container market and for Commercial Vehicle Chassis protection.

Write your review

Related products

RustOleum Metal Cladding Primer RustOleum Metal Cladding...
Don’t replace old and weathered cladding, Renovate with the...
Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Teamac Tropical Killa
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...
Teamac Antifouling A Teamac Antifouling A
Teamac "A" Antifouling is a premium physically ablative...
Teamac Boot Topping Teamac Boot Topping
5A high quality, hard wearing boot-topping paint. Used to...
Teamac Anti-Slip Suregrip Deck paint Teamac Anti-Slip Suregrip...
Teamac Suregrip provides an anti-slip finish for wood, grp and...
Teamac Bilge Paint Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces...
RustOleum Combicolor RustOleum Combicolor
A high performance, one coat interior and exterior maintenance...
Rustoleum Pegakote Rustoleum Pegakote
A waterborne, high performance satin gloss floor coating with...
RustOleum Flexible  Epoxy B95 RustOleum Flexible Epoxy B95
 Outstanding corrosion protection in heavy industrial or...
SteelSeal Metal Cladding Maintenance Paint SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Paint  Akzo Nobel's...
SteelSeal Metal Cladding Maintenance Primer SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Primer Akzo Nobel's...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish New Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...
Protega ViterPrime 016 Single Pack Zinc Phosphate Primer New Protega ViterPrime 016...
 An easy to use alkyd zinc phosphate anticorrosive primer, for...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish New Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish New Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish New Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...
Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers New Protega ViterLac C12...
 A single pack, phenolic-modified alkyd primer/finish,...
Protega Prime VRP Compliant Primer for Vehicle Refinishing New Protega Prime VRP Compliant...
A single pack, fast drying alkyd primer specially designed for...
ProtegaPrime QD Matt Primer New ProtegaPrime QD Matt Primer
An single pack Modified Anti-Corrosive Matt Primer for the ACE...
Protega Viterlac ACV Quick Drying Alkyd Gloss Finish New Protega Viterlac ACV Quick...
Protega Viterlac ACV 90 A fast drying modified alkyd gloss...
Protega ViterLac ABV  High Build Gloss Finish New Protega ViterLac ABV High...
A high performance, modified alkyd, high gloss finish which...
Protega ViterLac AM112 Urethane Alkyd Micaceous Iron Oxide New Protega ViterLac AM112...
ViterLac AM112 - Urethane Alkyd MIO A single pack, white...
Protega ViterShield SPF New Protega ViterShield SPF
ViterShield SPF Epoxy Primer/Finish A two pack epoxy...
ProtegaLac PU90 PU modified  High Gloss Enamel New ProtegaLac PU90 PU modified...
ViterLac PU90 Gloss Finish A general purpose urethane alkyd...
ProtegaLac TF95  High Gloss CV Enamel New ProtegaLac TF95 High Gloss...
 A single pack, full gloss, high quality finish specially...
Protega ViterShield 177 New Protega ViterShield 177
ViterShield 177 Epoxy Primer/Finish An economic, high solids...