ProtegaLac C12  Anti-Corrosive Primer/Finish for Containers Maximize

Protega ViterLac C12 Anti-Corrosive Primer/Finish for Containers

 A single pack, phenolic-modified alkyd primer/finish, specially developed for the transport container market. Used on dry cargo transport containers, ISO tank containers, anti-vandal accommodation units, waste containers and other industrial steel fabrications.

More details

£ 7.30

ViterLac C12 Primer/Finish  

A single pack, phenolic-modified alkyd primer/finish, specially developed for the transport container market. Used on dry cargo transport containers, ISO tank containers, anti-vandal accommodation units, waste containers and other industrial steel fabrications.

A high build, fast drying one-coat system with an eggshell finish which helps disguise typical dents and welds and with good colour stability.

A high content of zinc phosphate anticorrosive pigment gives high levels of protection in aggressive environments.

Tested for resistance to BS148 transformer oil.

Available in a very wide colour range.

Surface Preparation

All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination. Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams

For best performance, blast clean to Sa2½ (ISO 8501-1:2007), surface profile 50-75 microns

Can also be applied to clean, dry, abraded steel 

Aluminium and Zinc coated surfaces: surfaces should be degreased, abraded and etch primed prior to application of ViterLac C12.

Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.

Thinner 1006 Thinner

Equipment Cleaner 1006 Thinner

Application Conditions

Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.

Application Methods

Airless Spray,  Yes

Conventional Spray, Yes

Brush, No

Roller, No  

Airless Spray: is the preferred method. Output fluid pressure at tip 2000 psi, Tip Size 13-15 thou (0.33-0.38 mm

Air assisted and HVLP:  also suitable.   

Conventional spray: requires thinning by up to 10% with 1006 Thinner  

Brush application: should be used for touch up of small areas only.

Product Notes

A dry film thickness of 125µm is recommended over blast cleaned steel substrates.

Health & Safety

Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request.

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers

Protega ViterLac C12 Anti-Corrosive Primer/Finish for Containers

 A single pack, phenolic-modified alkyd primer/finish, specially developed for the transport container market. Used on dry cargo transport containers, ISO tank containers, anti-vandal accommodation units, waste containers and other industrial steel fabrications.

Write your review

Related products

RustOleum High Performance Epoxy 9100 RustOleum High Performance...
A hard wearing epoxy coating offering twice the coating...
RustOleum 9169 Epoxy Rust Primer RustOleum 9169 Epoxy Rust...
The economic alternative to blast cleaning rust covered steelwork
RustOleum Water Based Epoxy 5900 RustOleum Water Based Epoxy...
5900 epoxy system is a two pack water-based system for metal...
9600 Rust-O-Thane Flexible Polyurethane 9600 Rust-O-Thane Flexible...
Flexible solvent based two pack polyurethane for a very...
RustOleum 9200 Waterbased Polyurethane RustOleum 9200 Waterbased...
Satin water based two pack polyurethane for a very durable and...
Rust Oleum High-Build Polyurethane 9900 Rust Oleum High-Build...
High build solvent based polyurethane for a very durable and...
Rustoleum Noxyde Flexible Coating Rustoleum Noxyde Flexible...
The ultimate in corrosion and waterproofing protection, for...
Rustoleum Peganox Brushable, Flexible Coating Rustoleum Peganox...
The ultimate in brush applied corrosion and waterproofing...
Rustoleum Pegarust - Flexible Solventborne Coating  Rustoleum Pegarust -...
High performance corrosion protection for application at low...
RustOleum Cladding Rejuvenation Top Coat RustOleum Cladding...
Don’t replace old and weathered cladding. Renovate with the...
RustOleum Metal Cladding Primer RustOleum Metal Cladding...
Don’t replace old and weathered cladding, Renovate with the...
Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Teamac Tropical Killa
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...
Teamac Antifouling A Teamac Antifouling A
Teamac "A" Antifouling is a premium physically ablative...
Teamac Boot Topping Teamac Boot Topping
5A high quality, hard wearing boot-topping paint. Used to...
Teamac Anti-Slip Suregrip Deck paint Teamac Anti-Slip Suregrip...
Teamac Suregrip provides an anti-slip finish for wood, grp and...
Teamac Bilge Paint Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces...
RustOleum Combicolor RustOleum Combicolor
A high performance, one coat interior and exterior maintenance...
Rustoleum Pegakote Rustoleum Pegakote
A waterborne, high performance satin gloss floor coating with...
RustOleum Flexible  Epoxy B95 RustOleum Flexible Epoxy B95
 Outstanding corrosion protection in heavy industrial or...
SteelSeal Metal Cladding Maintenance Paint SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Paint  Akzo Nobel's...
SteelSeal Metal Cladding Maintenance Primer SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Primer Akzo Nobel's...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish New Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...
Protega ViterPrime 016 Single Pack Zinc Phosphate Primer New Protega ViterPrime 016...
 An easy to use alkyd zinc phosphate anticorrosive primer, for...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish New Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish New Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish New Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...