RustOleum 9169 Epoxy Rust Primer Maximize

RustOleum 9169 Epoxy Rust Primer

The economical alternative to blast cleaning rust covered steelwork.

Apply directly to rust covered steel.

Over coat with epoxy finishes

More details

£ 126.45

RUST-OLEUM High-Performance Epoxy System Rust Primer 9169 is based on two-component, solvent-based epoxy resins and rust-inhibitive pigments. It is formulated for application on manually prepared rusted steel surfaces.
and offers excellent protection against strong chemicals, acids, alkalis and solvents; frequent product spillage and regular chemical cleaning; high humidity and moisture conditions.

The lower coast alternative to blast cleaning
Apply directly to rust covered steel
Excellent chemical resistance
Over coat with High performance epoxy finishes

Surface Preparation
Remove grease, oil and all other surface contaminations with ND14 cleaner Degreaser or high pressure (steam) cleaning. Remove loose rust, mill scale and deteriorated coatings by hand or power tool cleaning. Sand previous coatings which are in good condition to remove gloss and to roughen the surface slightly check compatibility. The surface must be clean and dry during application.

Application and Thinning
Brush: Up to 10 vol.%; RUST-OLEUM Thinner 160. Use natural bristles, longhair brushes.
Roller: Up to 10 vol.%; RUST-OLEUM Thinner 160. Use short/medium pile polyamide (perlon 8 - 12 mm) rollers.
Air-atomised spray: Up to 20 vol.%; RUST-OLEUM Thinner 160.
Gravity cup and pressure cup. Tip size: 1.2 -2.2 mm. Atomising pressure: 2 - 4 bar.
Airless spray: Up to 10 vol.%; RUST-OLEUM Thinner 160.
Pneumatic and electric airless equipment. Tip size: 0.013-0.018 inch.Fluid pressure: 125 - 200 bar.
Avoid excessive film thickness.

 

Finish Gloss
Application Brush | Roller | Conventional Spray
Drying time (touch dry) 2 hours
Drying time (recoat) 16 hours
Drying time (full cure) 7 days
Theoretical Coverage m² / litre 11.7

No customer comments for the moment.

Write your review

RustOleum 9169 Epoxy Rust Primer

RustOleum 9169 Epoxy Rust Primer

The economical alternative to blast cleaning rust covered steelwork.

Apply directly to rust covered steel.

Over coat with epoxy finishes

Write your review

Related products

Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Antifouling Teamac Tropical Killa...
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...
Teamac Antifouling A Teamac Antifouling A
Teamac "A" Antifouling is a premium physically ablative...
Teamac Boot Topping Teamac Boot Topping
5A high quality, hard wearing boot-topping paint. Used to...
Teamac Anti-Slip Suregrip Deck paint Teamac Anti-Slip Suregrip...
Teamac Suregrip provides an anti-slip finish for wood, grp and...
Teamac Bilge Paint Teamac Bilge Paint
Teamac Bilge Paint provides protection for the inside surfaces...
RustOleum Combicolor RustOleum Combicolor
A high performance, one coat interior and exterior maintenance...
Rustoleum Pegakote Rustoleum Pegakote
A waterborne, high performance satin gloss floor coating with...
RustOleum Flexible  Epoxy B95 RustOleum Flexible Epoxy B95
 Outstanding corrosion protection in heavy industrial or...
SteelSeal Metal Cladding Maintenance Paint SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Paint  Akzo Nobel's...
SteelSeal Metal Cladding Maintenance Primer SteelSeal Metal Cladding...
SteelSeal Metal Cladding Maintenace Primer Akzo Nobel's...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish New Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...
Protega ViterPrime 016 Single Pack Zinc Phosphate Primer New Protega ViterPrime 016...
 An easy to use alkyd zinc phosphate anticorrosive primer, for...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish New Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish New Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish New Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...
Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers New Protega ViterLac C12...
 A single pack, phenolic-modified alkyd primer/finish,...
Protega ViterLac Containergard HS New Protega ViterLac...
A single pack Modified Anti-Corrosive One Coat Full Primer /...
Protega Prime VRP Compliant Primer for Vehicle Refinishing New Protega Prime VRP Compliant...
A single pack, fast drying alkyd primer specially designed for...
ProtegaPrime QD Matt Primer New ProtegaPrime QD Matt Primer
A single pack Modified Anti-Corrosive Matt Primer for the ACE...
Protega Viterlac ACV Quick Drying Alkyd Gloss Finish New Protega Viterlac ACV Quick...
Protega Viterlac ACV 90 A fast drying modified alkyd gloss...
Protega ViterLac ABV  High Build Gloss Finish New Protega ViterLac ABV High...
A high performance, modified alkyd, high gloss finish which...
Protega ViterLac AM112 Urethane Alkyd Micaceous Iron Oxide New Protega ViterLac AM112...
ViterLac AM112 - Urethane Alkyd MIO A single pack, white...
Protega ViterShield SPF Epoxy Primer/Finish New Protega ViterShield SPF...
ViterShield SPF Epoxy Primer/Finish A two pack epoxy...
ProtegaLac PU90 PU modified  High Gloss Enamel New ProtegaLac PU90 PU modified...
ViterLac PU90 Gloss Finish A general purpose urethane alkyd...
ProtegaLac TF95  High Gloss CV Enamel New ProtegaLac TF95 High Gloss...
 A single pack, full gloss, high quality finish specially...
Protega ViterShield 177 New Protega ViterShield 177
ViterShield 177 Epoxy Primer/Finish An economical, high...