Temadur Maximize

Tikkurila Temadur 20/50/90

A high performance two pack polyurethane paint containing anti-corrosion pigments. Recommended for tank exteriors, structural steelwork, machinery and equipment.

Available in any colour and Semi Matt, Semi Gloss and Gloss finishes.

3L & 10L

More details

£ 40.23

Recommended as a primer for polyurethane systems or as a semi-matt topcoat for epoxy systems exposed to weathering and/or chemical stress. It can be used as a single coat system for steel , zinc and aluminium surfaces. The product has a MED (Marine Equipment Directive) certificate number VTT-C-4033-15-09 for painting surfaces inside ships.                                                      

Surface Preparation                                                                                                           
Surfaces to be coated must be clean, dry and free from any material that might affect adhesion, remove loose flaking or friable material. Apply in dry conditions where humidity is at normal levels.
Cold damp conditions will impair drying times and the final finish. The temperature of the substrate should be minimum 0 °C and at least 3 ° C above the dew point of the air.
The product should not be applied at temperatures below 0 °C where there is a possibility of ice formation on the substrate. The temperature of paint itself should be above + 15 °C for proper application.
Good ventilation is required in confined areas during application and drying.
Repair any damage to the metal surface. Fill holes in joints and welding where rust may develop with Rustoleum Elastofill Flexible Joint Filler.
Thoroughly degrease bare metalwork or previously painted and primed surfaces with HSP ND14 Cleaner Degreaser to remove dirt, grease and salts.
Structural Steel Surfaces: For optimum results blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, manual rust removal and the application of etching, chromate or zinc phosphate primers are recommended to ensure adhesion and long term corrosion resistance.                                                      
General Advice and Good Practice                    
Mild Steel - Degrease and either manually abrade or shot blast to Sa2½  before application of the primer coat.                                                                                                        
Phosphate Steel - Degrease and either manually abrade or shot blast to Sa2½ before application of the primer coat                                                                                                        
New Galvanised Steel - Degrease and treat with Galvanising Wash 84/1 before application of the primer coat.                                                                                                        
Old Galvanised Steel - Degrease and abrade or apply Rust-Oleum Surfa Etch Solution 108 to remove surface salts.                                      
Aluminium - Degrease and apply one coat of Etch Primer (chromate and chromate free formulations are available) before application of the primer coat.
Stainless Steel - Degrease and abrade if possible before application of one coat of Etch Primer before application of the primer coat.                                                                                                        

Application
For full application information please refer to the Product Data Sheet or call our technical team.
Cleaning Equipment
Clean equipment with 1048 thinners after use

Finish Semi-Matt, Semi-Gloss, Gloss
Application Spray / Brush
Thinner 1048
Drying time (touch dry) 4 hours
Drying time (recoat) 4 hours
Recommended WFT µm 70
Theoretical Coverage m² / litre 14.2

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

Tikkurila Temadur 20/50/90

Tikkurila Temadur 20/50/90

A high performance two pack polyurethane paint containing anti-corrosion pigments. Recommended for tank exteriors, structural steelwork, machinery and equipment.

Available in any colour and Semi Matt, Semi Gloss and Gloss finishes.

3L & 10L

Write your review

Related products

Non Isocyanate Acrylic Finish Non Isocyanate Acrylic Finish
A Fast Drying, Two Pack Non Isocyanate Acrylic Finish with...
One Coat Primer Finish One Coat Primer Finish
A one coat, anti-corrosion primer/finish for structural steel....
Quick Drying Enamel Quick Drying Enamel
A High Performance, Quick Drying Low Odour Synthetic Enamel in...
High Performance Enamel High Performance Enamel
High Quality, Tough Synthetic Enamel for all applications...
Epoxy Machinery Enamel Epoxy Machinery Enamel
A high performance machinery enamel resistant to oils, petrol,...
Fast Drying Enamel For Difficult Surfaces Fast Drying Enamel For...
A Very Fast Drying (15 minutes) Modified Enamel for Surfaces...
Cellulose Finish Cellulose Finish
A High Quality Automotive Grade Cellulose Finish for Exterior...
Vinyltech 45 for Metal cladding Vinyltech 45 for Metal...
A durable, combined Primer Finish. Suitable for coating...
Two Pack Epoxy Finish Two Pack Epoxy Finish
A Highly Durable, Abrasion Resistant two pack Epoxy Finish...
Two Pack Polyurethane Finish Two Pack Polyurethane Finish
A high opacity two pack polyurethane with excellent weather...
Two Pack Anti Graffiti Polyurethane Finish Two Pack Anti Graffiti...
A high opacity two pack polyurethane that has anti grafitti...
Low Smoke Two Pack Polyurethane Finish Low Smoke Two Pack...
A high opacity two pack polyurethane with excellent weather...
20L, Tikkurila Temasil 90 20L, Tikkurila Temasil 90
A two pack, ethyl silicate zinc rich paint to offer cathiodic...
8L, Tikkurila Temazinc 99 two component, polyamide zinc rich epoxy paint 8L, Tikkurila Temazinc 99...
A two pack, polyamide cured zinc epoxy paint formulated to...
Chlorinated Rubber Finish Chlorinated Rubber Finish
A High Build Chlorinated Rubber Finish Providing High...
20L, Tikkurila Temabond ST 300 20L, Tikkurila Temabond ST 300
A two pack high-solids, modified epoxy paint with high...
20L, Tikkurila Temacoat SPA MIO Epoxy, with Aluiminium, Zinc Phosphate and MIO 20L, Tikkurila Temacoat SPA...
A high build, low solvent, two pack polyamide-cured epoxy...
RustOleum Alkythane 7500 RustOleum Alkythane 7500
Reduce coating times with a high performance single pack...
RustOleum High Performance Epoxy 9100 RustOleum High Performance...
A hard wearing epoxy coating offering twice the coating...
RustOleum Water Based Epoxy Finish 5900 RustOleum Water Based Epoxy...
5900 epoxy system is a two pack water-based system for metal...
9600 Rust-O-Thane Flexible Polyurethane Finish 9600 Rust-O-Thane Flexible...
Flexible solvent based two pack polyurethane for a very...
RustOleum 9200 Waterbased Polyurethane Paint RustOleum 9200 Waterbased...
A Satin water based two pack polyurethane paint for a very...
Rustoleum Noxyde Flexible Coating Rustoleum Noxyde Flexible...
The ultimate in corrosion and waterproofing protection, for...
Rustoleum Peganox Brushable, Flexible Coating Rustoleum Peganox...
The ultimate in brush applied corrosion and waterproofing...
Rustoleum Pegarust - Flexible Solventborne Coating  Rustoleum Pegarust -...
High performance corrosion protection for application at low...
Teamac Marine Undercoat Teamac Marine Undercoat
Teamac Marine Undercoat is an interior and exterior, oil based...
Teamac Marine Gloss Teamac Marine Gloss
Teamac Marine Gloss is a high quality, modified alkyd marine...
Teamac Tropical Killa Antifouling Teamac Tropical Killa...
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Protector Antifoul II Teamac Protector Antifoul II
Teamac Protector Antifouling contains cuprous oxide to give...
Teamac Antifouling D Teamac Antifouling D
Teamac Antifouling ‘D’ is a  physically ablative product and...