One Coat Fast Drying Etching Enamel Maximize

One Coat Fast Drying Etching Enamel

A Fast Dry One Coat, Single Pack Etching Enamel for all types of Metal including Stainless Steel and Aluminium.

Available in all colours in Satin and Gloss finishes.

More details

£ 9.68

 A highly effective single pack primer finish that provide excellent adhesion to blasted and non blasted steelwork. The acid content of the product etches the surface. It dries to an attractive satin sheen that can be left as the final finish or it can be overcoated with most single pack and two pack products.

Surface Preparation                                                                                                           
Surfaces to be coated must be clean, dry and free from any material that might affect adhesion, remove loose flaking or friable material. Apply in dry conditions where humidity is at normal levels.
Cold damp conditions will impair drying times and the final finish. The temperature of the substrate should be minimum 0°C and at least 3°C above the dew point of the air.
The product should not be applied at temperatures below 0°C where there is a possibility of ice formation on the substrate. The temperature of paint itself should be above + 15°C for proper application.
Good ventilation is required in confined areas during application and drying.
Repair any damage to the metal surface. Fill holes in joints and welding where rust may develop with Rustoleum Elastofill Flexible Joint Filler.
Thoroughly degrease bare metalwork or previously painted and primed surfaces with HSP ND14 Cleaner Degreaser to remove dirt, grease and salts.
Structural Steel Surfaces: For optimum results blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, manual rust removal and the application of etching, chromate or zinc phosphate primers are recommended to ensure adhesion and long term corrosion resistance.                                                      
General Advice and Good Practice                    
Mild Steel - Degrease and either manually abrade or shot blast to Sa2½  before application of the primer coat.                                                                                                        
Phosphate Steel - Degrease and either manually abrade or shot blast to Sa2½ before application of the primer coat                                                                                                        
New Galvanised Steel - Degrease and treat with Galvanising Wash 84/1 before application                                                                                              
Old Galvanised Steel - Degrease and abrade or apply Rust-Oleum Surfa Etch Solution 108 to remove surface salts.                                      
Aluminium - Degrease and apply one coat
Stainless Steel - Degrease and abrade if possible                                                                                                      

Application
For full application information please refer to the Product Data Sheet or call our technical team.
Cleaning Equipment
Clean equipment with TA2 thinners after use

Finish Satin / Gloss
Application Spray / Brush
Thinner TA2
Drying time (touch dry) 30 minutes
Drying time (recoat) 1 hour
Theoretical Coverage m² / litre 10

We can tint this product to your exact specification from any colour chart or sample.

Simply select 'Tinted to your colour' from the dropdown list, enter the reference code for the colour you want in the field below, click SAVE and then add the product to your basket.

We also have ideas to set the ball rolling in our Colour Section where we have added a number of widely used colour ranges.

Need help? Call us on 01793 511537

Remember to add the product to your basket after you have saved it!

No customer comments for the moment.

Write your review

One Coat Fast Drying Etching Enamel

One Coat Fast Drying Etching Enamel

A Fast Dry One Coat, Single Pack Etching Enamel for all types of Metal including Stainless Steel and Aluminium.

Available in all colours in Satin and Gloss finishes.

Write your review

Related products

10E Fast Dry Metal Primer 10E Fast Dry Metal Primer
A very economical, quick drying primer combining anti...
One Coat Primer Finish One Coat Primer Finish
A one coat, anti-corrosion primer/finish for structural steel....
Chlorinated Rubber Finish Chlorinated Rubber Finish
A High Build Chlorinated Rubber Finish Providing High...
Transparent Topcoat Transparent Topcoat
Transparent topcoat
Vinyltech 45 for Metal cladding Vinyltech 45 for Metal...
A durable, combined Primer Finish. Suitable for coating...
10L, Tikkurila Fontezinc 85, zinc rich epoxy paint 10L, Tikkurila Fontezinc...
A two pack, waterborne zinc rich epoxy paint providing...
8L, Tikkurila Temazinc 99 two component, polyamide zinc rich epoxy paint 8L, Tikkurila Temazinc 99...
A two pack, polyamide cured zinc epoxy paint formulated to...
Protega ViterLac 046 Anti-corrosive Semi-Gloss Primer/Finish New Protega ViterLac 046...
A fast drying one coat, semi-gloss, anticorrosive...
Protega ViterLac Containergard HS New Protega ViterLac...
A single pack Modified Anti-Corrosive One Coat Full Primer /...
Protega ViterLac C12  Anti-Corrosive Primer/Finish for Containers New Protega ViterLac C12...
 A single pack, phenolic-modified alkyd primer/finish,...
Protega ViterLac OCF Anti-corrosive Gloss Primer/Finish New Protega ViterLac OCF...
A single pack one coat Anti-Corrosive One Coat Full Gloss...
Protega ViterLac 305 Vinyl Acrylic Anti-Corrosive Primer/finish New Protega ViterLac 305 Vinyl...
A high performance single pack Vinyl Acrylic Anti-Corrosive...
Protega ViterPrime 035 High Build Zinc Phosphate Primer/Finish New Protega ViterPrime 035 High...
Single Pack, Quick Drying High Build Zinc Phosphate Primer for...